Spiral Tubing & Concrete Formwork solutions

Pier Liners - Trans Vent
Pier Liners Chart - Trans Vent

Better known as Pier Liners… Trans Vent can deliver to your job site ‘our tried and tested formula Pier Liners’ which lead the way in concrete foundation forming for both regular and specialised uses. Lightweight, cost efficient and with prompt onsite delivery, Trans Vent concrete forming solutions will help your project run on time and on budget. You can be confident in the ridgidity with 3 corrugations per strip, which are internal making them easy to slip into a drilled, or hand dug hole down to rock or solid anchor base. Trans Vent Pier Liners are easy to cut and modify with any angle grinder fitted with a steel cutting wheel.

 

Trans Vent can supply the following stock sizes (in most cases) next day delivery.
Stock sizes shown are 4 metres in length:mm diameter O/D. 305, 406, 457, 508, 610, 711, 762, 813, 914, 1016, 1118, 1219

 

Columns
Sizing Chart
Trans Vent Column Formers are the most economical column formers on the market. They are resistable to water (unlike cardboard-paper column formers) and do not bow under weight pressure (unlike lock seam plastic column formers). The Trans Vent product is also less expensive, and can be made to the required length.

Trans Vent deliver daily to the Sydney Metropolitan area at a cost far more competitive than a courier, and at least once a week to most coastal and country areas. Quality, Price and Availability have made Trans Vent Column Formers the BEST selling column formers in New South Wales.

Column Formers Smooth Lined
Sizing Chart

Trans Vent also offers the very popular (smooth) plastic lined column former.

These linings are made from recycled plastic P.E.T. bottles. The plastic liners are inserted into the steel column former at the factory, giving a “smooth as marble” finish to the column along with the strength of steel in the former. Once stripped, this minimises rendering, and should be used in areas where attention to detail is a must.

Trans Vent deliver daily to the Sydney Metropolitan area at a cost far more competitive than a courier, and at least once a week to most coastal and country areas. Quality, Price and Availability have made Trans Vent Column Formers the BEST selling column formers in New South Wales.

Oval Columns

Trans Vent Oval Column Formers are used as formwork construction in situations of limited space.

Ideal for basement carparks to fit more parking spaces etc. The Oval Duct size chart shows the equivalent capacity to round column formers below.

Oval Chart
Void Forming Tube

Trans Vent void forming tube is ideal for void – cavity forming within concrete formwork.

Used mainly for bridge spans and concrete decking, the void tubes are tied down to the steel reinforcement to prevent floating. Trans Vent void tubes can be fitted with either flat or bullnosed end caps and can be made in a range of profiles to suit your required application.

Here are just some of theTrans Vent Spiral Tubing and ducting uses

  • Column Formers
  • Pier Liners
  • Dust Extraction
  • Fume Extraction
  • Air Conditioning
  • Tunnel/Mine Ventillation
  • Void/Span tubing
  • Drainage/Irrigation
  • Pool Foundations
  • Down Pipes
  • Exhaust Flues
  • Rubbish Chutes
  • Laundry Chutes
  • Display Props
  • Refineries
  • Augers
  • Culvert
  • Underpinning

Your Name (required)

Your Phone Number

Your Email (required)

Subject

Your Message

captcha


transveSpiral Tubing & Concrete Formwork solutions